Menu
Menu
PARTS SPECTRUM
Microscrews, screws, rivets, studs and special parts by cold forging or turning process
WORKING RANGE
Parts with head Ø3÷12 mm
Head height Ø2÷5 mm
Shank Ø2÷5mm / M3÷M5
Shank length 5÷20 mm
SORTING RATE
Up to 1000 pp/minute
INSPECTION ACCURACY
Up to ±0,005 mm
PARTS SPECTRUM
Screws, bolts, rivets, studs, ball pins, bushes, fittings and special parts by cold forging or turning process
WORKING RANGE
Parts with head Ø4÷25 mm
Head height Ø3÷25 mm
Shank Ø3÷12 mm / M3÷M12
Shank length 6÷90 mm
SORTING RATE
Up to 850 pp/minute
INSPECTION ACCURACY
Up to ±0,005 mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Screws, bolts, rivets, studs, ball pins,bushes, fittings and special parts by cold forging or turning process
WORKING RANGE
Headed or headless parts Ø5÷25 mm
Head diameter max Ø25 mm
Minimum shank length = 2x Max head Ø
Total length max 68 mm
SORTING RATE
Up to 450 pp/minute
INSPECTION ACCURACY
Up to ±0,01 mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Screws, bolts, rivets, studs, ball pins, bushes, brake-booster bolts, fittings and special parts by cold forging or turning process
WORKING RANGE
Parts with head Ø10÷45 mm
Head height Ø5÷35 mm
Shank Ø8÷20 mm / M8÷M20
Shank length 20÷200 mm
SORTING RATE
Up to 450 pp/minute
INSPECTION ACCURACY
Up to ±0,01mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Screws, bolts, rivets, studs, ball pins, bushes, brake-booster bolts, fittings and special parts by cold forging or turning process
WORKING RANGE
Parts with head Ø8÷35 mm
Head height Ø5÷25 mm
Shank Ø6÷16 mm / M6÷M16
Shank length 15÷120 mm
SORTING RATE
Up to 850 pp/minute
INSPECTION ACCURACY
Up to ±0,01 mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Nuts, fittings, washers, screws, distance rings, bushes, elastic rings, spring valve retainers and chain plates by cold forging, fine blanking or turning process
WORKING RANGE
Parts with diameter Ø5÷40 mm
Height/Length max 25 mm
SORTING RATE
Up to 450 pp/minute
INSPECTION ACCURACY
Up to ±0,01 mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Screws, bolts, rivets, studs, ball pins, bushes, fittings and special parts by cold forging or turning process
WORKING RANGE
Headed or headless parts Ø5÷25 mm
Head diameter max Ø25 mm
Minimum shank length = 2x Max head Ø
Total length max 68 mm
SORTING RATE
Up to 450 pp/minute
INSPECTION ACCURACY
Up to ±0,01 mm
SPECIAL PARTS ON DEMAND
PARTS SPECTRUM
Nuts, fittings, washers, screws, distance rings, bushes, elastic rings, spring valve retainers and chain plates by cold forging, fine blanking or turning process
WORKING RANGE
Parts with diameter Ø Ø6÷55 mm
Height/Length max 25 mm
SORTING RATE
Up to 1000 pp/minute
INSPECTION ACCURACY
Up to ±0,005 mm
SPECIAL PARTS ON DEMAND
15057 Tortona (AL) Italy
S.S. N.10 per Voghera 93/5/D
Tel +39 0131863447
info@dimacsrl.com
r.e.a 156548, reg. imp. 2494 Alessandria
C.F. /P. IVA / VAT: 01368210066
Capitale sociale €350,000,00 int.vers.